The 2018 MXZx 600RS E-TEC is based on the REV Gen4 platform for superior rider ergonomics and handling in rough conditions. Like all Gen4 sleds, the narrow design featuring centralized mass is agile and responsive while the Ergo Step side panels and beveled tunnel gives racers enormous freedom to ride the way they want – without interference from the chassis. Other features unique to the racing sled include a tilted tunnel with short heat exchanger, new motocross inspired seat, racing footholds and a small fuel tank.
The RAS 3 front suspension with unique steering system provides ultra precise handling with less effort so racers can concentrate on choosing the best lines. To further assist precise steering the sled is equipped with the new lightweight Pilot R2 skis that were race tested last year by top pros Tim Tremblay and Lincoln Lemieux.
One thing familiar will be the Racing rMotion skid frame in back – but it too receives some major upgrades. There’s a new KYB piggyback 46mm center shock, new motion ratio and calibration for the rear shock, and lighter weight components throughout.
The very special – for racing only – Rotax 600RS E-TEC engine is also all-new for 2018, with more horsepower and extremely fast dynamic response racers will appreciate. E-TEC direct injection makes its racing debut and combined with the booster injectors first deployed on the Rotax 850 E-TEC, delivers that quick response and contributes to the overall power gains. Other ideas adapted from the 850 for this specialty engine include a shorter intake tract with double reeds, digital eRAVE and lightweight exhaust system. The 600RS E-TEC also gains a little more displacement as it grows to 599.4 cc. The updated powerpack was completely reconfigured to fit in the efficient REV Gen4 platform.
And good news for racers that come into a corner a little too hot with all that extra power; new this year is a Brembo four-piston brake caliper mated to a new stainless steel rotor delivering stronger, more consistent performance and better durability.
2018 MXZx 600RS Highlights
• REV Gen4 Platform –
o Reinforced E and S modules
o NEW Taper/tilt tunnel
o Short heat exchanger (Replaceable rear part of the tunnel)
o NEW MX inspired seat
o NEW Racing foot box
o 5-gallon fuel tank
• RAS 3 Front Suspension
o NEW longer KYB Pro 40 R Shocks
o Rack steering with power assist
o NEW Taller spindle
o NEW lightweight Pilot R2 Ski
• Racing rMotion Rear Suspension
o Lighter components
o NEW 46mm KYB Pro series center shock (piggyback with comp. adjustment)
o NEW rear shock calibration and motion ratio
• Rotax 600RS E-TEC Engine (599.4 cc)
o E-TEC direct injection
o Intake booster injectors (850-inspired)
o Shorter intake length (850-inspired)
o Double reed valves (850-inspired)
o NEW mono block cylinder design with Plasma coating
o NEW Piston (larger bore)
o eRAVE (850-inspired)
o NEW lightweight exhaust system
• Drivetrain
o pDrive primary clutch
o TEAM TSS-04 secondary clutch
o NEW slip gear and final drive ratio (51t – 22t)
o RS drive axle
o NEW Belt
